|
|
Build Your Online Product Catalogs?
| Product Name: |
angular contact ball bearing
|
| Supply Ability: |
500million pcs |
| Related proudcts |
bearing, angular contact, |
| Specifications |
SKF/FAG |
| Price Term: |
FOB |
| Port of loading: |
shanghai port |
| Minimum Order |
100pcs |
| Unit Price: |
negotiate |
|
Since these bearings have a contact angle, they can sustain significant axial loads in one direction together with radial loads. Because of their design, when a radial load is applied, an axial force component is produced; therefore, two opposed bearings or a combination of more than two must be used.
Since the rigidity of single-row angular contact ball bearings can be increased by preloading, they are often used in the main spindles of machine tools, for which high running accuracy is required.
Usually, the cages for angular contact ball bearings with a contact angle of 30กใ (Symbol A) or 40กใ(Symbol B) are in accordance with Table 1,but depending on the application, machined synthetic resin cages or molded polyamide resin cages are also used.
Angular Contact Ball Bearings with contact angles of 15กใ (Symbol C) and 25กใ (Symbol A5) are primarily for high precision or high speed applications, and machined brass or synthetic resin cages or molded polyamide cages are used.
The maximum operating temperature of molded polyamide cages is 120℃.
DOUBLE-ROW ANGULAR CONTACT BALL BEARINGS
This is basically a back-to-back mounting of two single-row angular contact ball bearings, but their inner and outer rings are each integrated into one. Axial loads in both directions can be sustained, and the capacity to sustain moments is good. This type is used as fixed-end bearings. Their cages are pressed steel.
FOUR-POINT CONTACT BALL BEARINGS
The inner ring is split radially into two pieces. Their design allows one bearing to sustain significant axial loads in either direction. The contact angle is 35กใ, so the axial load capacity is high. This type is suitable for carrying pure axial loads or combined loads where the axial loads are high. The cages are made of machined brass.
Benefits:
Single-row angular contact ball bearing - suited to work in lower operating temperature and high speed with a heavy thrust load. Can be mounted in a duplex arrangement. The refined bore tolerance give a higher life.
Double-row angular |
| Company: |
Shanghai Xuyuan Electrical Bearing Co.Ltd
|
| Contact: |
Ms. lynn ma |
| Address: |
beijing east road |
| Postcode: |
No.815 |
| Tel: |
86-021-6339-1531 |
| Fax: |
86-021-6339-1565 |
| E-mail: |
|
|
|
|
Home
